
ServicesCommercial Roofing
Commercial Roofing in Roxboro, NC
We repair and replace roofs on existing shops, offices, churches and warehouses. Most are flat or low-slope, so the material matters more than on a steep roof. We look first, show you photos of what we found, and explain which membrane or metal fits your building.
Low-slope roofs need a different approach
A commercial roof usually sits nearly flat. Water drains slowly, sits in low spots and finds every open seam. That is why these roofs use sheet membranes, layered systems or metal panels instead of the shingles you see on a pitched roof.
Each option has a trade-off. TPO is a white single-ply sheet with heat-welded seams that reflects summer sun. EPDM is black rubber that stays flexible in the cold and lasts a long time, but its seams are glued or taped. Modified bitumen is a thicker, layered sheet that holds up to foot traffic. Metal sheds water fast where there is some pitch and lasts for decades if the fasteners are kept up.
We work on existing buildings: repairs, recovers and full tear-offs. If your roof only needs a checkup, our Roof Inspections page covers what we look at.
What the work includes
Membrane repairs
We patch punctures, reseal open seams and fix blisters on TPO, EPDM and modified bitumen. Patches match the existing membrane so they bond. Mixing membrane types is a common cause of repeat leaks.
Tear-off and replacement
When the membrane and insulation are worn out, we strip the roof to the deck, replace wet insulation and install a new system. You pick the system after we walk through the options.
Recover over the old roof
If the deck and insulation are dry and code allows it, a new membrane can go over the old one. That saves tear-off time and disposal. We check for trapped moisture first, because a recover over wet insulation fails early.
Flashing, curbs and penetrations
Most flat roof leaks start at HVAC curbs, vent pipes, skylights and wall edges, not out in the open field. We rebuild flashing at these spots so it matches the roof membrane and bonds to it.
Drains, scuppers and edge metal
We clear and reset drains and scuppers and fix loose edge metal. If the building has gutters, our Gutters page covers that work.
Signs your building's roof needs work
Water still standing two days after rain
Ponding ages a membrane fast and adds weight to the deck. It often points to a clogged drain or a low spot.
Water marks inside
Yellow or brown rings on a drop ceiling are often the first clue. Water travels along the deck before it drips, so the real entry point can sit well away from the mark.
Lifting seams or bubbles
Lifted seam edges on EPDM or blisters on modified bitumen let water run under the sheet. Small ones are fixable if caught early.
Loose screws or rust on metal
Backed-out screws and cracked washers are where metal roofs leak. Rust along panel laps means the coating has worn through.
Damage after a storm
Hail can bruise a membrane without leaving a hole you can see from the ground, and wind can peel back edge metal. Our Storm Damage Repair page explains what we check.
From first visit to final walk
- 1
Roof walk and photo report
We get up top and look over seams, flashing and drains, taking moisture readings where they help. Then you get a photo report and a straight answer on repair or replacement. The visit is free.
- 2
Options and written estimate
We explain which systems fit your roof's slope, foot traffic and budget, and why. The estimate is broken out line by line so you can compare.
- 3
Work planned around your hours
We plan the job so you can stay open. Loud tear-off can go early, and we keep entrances and parking clear where we can. Any open section is sealed before we leave each day.
- 4
Cleanup and final look
Old roofing gets hauled away and we run a magnet over the lot to pick up stray fasteners. Once everything is done, we go up together so you can see the new seams and flashing for yourself. We also send pictures of the finished job for your records.
What moves the price
We price every commercial roof on what we find up top, so we don't quote numbers before an inspection. The system you choose is one part of it. Size, what is underneath and access matter just as much. Financing available through Acorn Finance.
- Square footage and shape
- Bigger roofs cost more overall. Simple rectangles go faster than roofs broken up by parapets, walls and level changes.
- Roof system
- TPO, EPDM, modified bitumen and metal differ in both material and labor cost. Thicker membranes and fully adhered installs cost more than thinner, mechanically fastened ones.
- Wet insulation and deck condition
- Soaked insulation has to come out, and rotted wood or rusted steel decking adds work. The moisture checks during the inspection tell us this up front.
- Units, vents and skylights
- Each opening in the roof gets flashed on its own, so a roof crowded with HVAC units and vents takes more labor. Some units need to be lifted onto new curbs, which means coordinating with your HVAC company.
- Recover versus tear-off, permits and timing
- A recover skips tear-off and disposal when it is allowed. Permits add a step, and cold Roxboro winter days limit when some adhesives can go down, which can affect scheduling.
Commercial roofing questions
Something not covered here? (336) 962-4225
Which material is best for a flat roof?
There isn't one best choice. TPO is popular because the white surface helps with cooling bills in hot North Carolina summers. EPDM suits simple roofs and handles cold well. Modified bitumen takes foot traffic better, so it fits roofs with a lot of equipment service. We'll tell you what we'd pick for your building and why.
Can you fix a leak without replacing the whole roof?
Often, yes. Many commercial leaks come from one failed seam or flashing detail. If the inspection shows most of the roof is sound, we'll recommend a repair and say so plainly. Our Roof Repair page covers smaller fixes in more detail.
Do we have to close while you work?
Usually not. Nearly all of the work happens on top of the building. Before we start, we talk through noise, adhesive smell near air intakes and access, then plan the loud parts around your hours.
Do you work on metal roofs?
Yes. We replace worn fasteners and washers, reseal laps and flash around equipment. If panels are rusted through, we'll show you photos and talk through your options.
Can you help with an insurance claim on our building?
Yes. We'll meet your adjuster on site and help you with the claim from the first call to the final paperwork. Before that meeting we photograph every damaged spot, then we go up with the adjuster and point each one out. The adjuster makes the call on the claim; our job is making sure nothing on the roof gets overlooked.
Do you work outside Roxboro?
Yes. We work on commercial roofs in Roxboro and nearby towns such as Oxford, Hillsborough, Butner and Mebane. The Service Areas page has the full list.

Find out what's going on up there
We'll walk the roof, photograph what we see and put it all in a report you can keep. There's no charge for the inspection, so you know where things stand before spending a dollar.