Skip to content

A free roof inspection and a photo report in hand

(336) 962-4225
(336) 962-4225
White seamless gutter and downspout along the eave of a red brick ranch home with black shutters, an aluminum ladder leaning against the roofline

ServicesGutters

Gutters in Roxboro

We install and repair gutters and downspouts that move water away from your roof edge, siding and foundation. We size them to your roof, tell you plainly how aluminum, steel and copper compare, and show you photos of what we find before you decide.

What Gutters Do for Your Home

Gutters take the rain that runs off your roof and send it somewhere safe. When they stop working, that water drops right at the base of the wall. Over time it rots fascia boards, streaks siding and soaks the ground beside your foundation.

Most gutter trouble traces back to size, pitch or a material that doesn't fit the spot. A hard summer thunderstorm around Roxboro can dump more water in twenty minutes than a small gutter can handle, so it spills over the front even when it's clean.

Some jobs only need a repair. Others need a new run. We'll tell you which one yours is, and show you why.

What Our Gutter Work Includes

One-piece aluminum gutters

Most homes get aluminum formed on site from a coil. Each run comes out as a single piece from corner to corner. With no joints along the run, there are fewer spots to drip. Aluminum won't rust and comes in plenty of colors.

Steel and copper options

Galvanized steel is stiffer and takes a ladder or a falling limb better, but it can rust once the coating wears thin. Copper costs the most and lasts a very long time, turning brown and then green as it ages. If either suits your house, we'll go over both.

5-inch or 6-inch sizing

Five-inch K-style is the usual size. Steep roofs, long runs and valleys that empty into one corner often call for six-inch gutters and bigger downspouts. We measure first, then recommend.

Downspouts and drainage

Downspouts go where the water really gathers. Extensions or splash blocks carry it out away from the foundation.

Gutter guards

Pine needles and oak leaves clog gutters fast. We lay out the trade-offs between screens, micro-mesh and solid covers, since no single guard suits every yard.

Fascia check

We check the board the gutter hangs on before anything new goes up. New metal screwed into soft wood won't hold for long.

Signs Your Gutters Need Attention

  • Water pouring over the front

    If clean gutters still overflow in a hard rain, they're too small or pitched wrong.

  • Sagging or pulling away

    Loose hangers or rotted fascia let a run drop. Water then pools in the low spot and adds more weight.

  • Drips at the seams and corners

    Older sectional gutters leak where pieces join. Sealant buys time, but it doesn't fix the joint for good.

  • Peeling paint or stains below

    Streaks on siding or flaking trim under the gutter line usually mean water is getting behind or over the gutter.

  • Washed-out soil or mulch

    A trench under the roof edge or a wet crawlspace often points to a missing or short downspout.

How a Gutter Job Goes

  1. 1

    We look and take photos

    We check the gutters, downspouts, fascia and roof edge above them. Those pictures go into a short report, so you can see the inside of every run without climbing a ladder.

  2. 2

    We go over your options

    We explain whether a repair will do, which material fits and what size you need. You get your quote by phone and in writing, with each part listed.

  3. 3

    Old gutters come down

    We take down the old runs, haul them off and replace any soft fascia from the photos you already saw.

  4. 4

    New gutters go up

    We form one-piece runs on site, slope them toward the downspouts and fasten them with hidden hangers. Most homes are finished in a day.

  5. 5

    Flow test and cleanup

    A hose goes in at the high end so we can watch the water reach each downspout. Then we pick up metal scraps and screws from your yard and flower beds.

What Moves the Price of Gutters

Two things drive most gutter quotes: how much metal goes up and how hard the walls are to reach. Every part is listed on your quote, so nothing is buried in one lump number. For homeowners who would rather spread the cost over time, there is financing available through Acorn Finance.

Material
Aluminum is the least expensive of the three. Steel costs more, and copper sits well above both.
Length and size
The total feet of gutter adds up, along with each corner and downspout. Stepping up from five-inch to six-inch raises it too.
Height and access
Two-story walls, steep roof slopes and cramped spots over decks or porches take extra time and gear.
Fascia repair
Soft or rotted boards get replaced before any new gutter is hung. You see the photos of that wood before we price it in.
Guards
Guards add to the total. Which type you choose changes the price more than whose name is on the box.

Gutter Questions We Hear

Something not covered here? (336) 962-4225

Should I repair my gutters or replace them?

A run that is still straight with a few leaky joints can usually be repaired. If it sags in several spots, drips at many seams or is too small for the roof, new gutters are money better spent. We'll show you the photos and tell you what we'd do on our own house.

Is aluminum good enough, or should I go with steel or copper?

For most homes, one-piece aluminum is the right pick. It won't rust and it costs less. Steel earns its place where limbs drop often or ladders lean on the gutters. Copper is mostly about looks and long life on a house where the style calls for it.

Do gutter guards really work?

They cut down on cleaning, but you'll still need to check them. Micro-mesh stops pine needles better than wide screens. Solid covers can shoot water past the edge in a heavy rain on a steep roof. We'll match the guard to the trees around your house.

Will storm damage to my gutters be covered by insurance?

It can be, if wind or a falling limb caused it. When you file a claim, we can be there when the adjuster comes out and give you a hand with each step of the claim. We also check the roof, since a storm that dents gutters often hurts shingles too. Our Storm Damage Repair page has more on that.

Should I replace my gutters when I get a new roof?

It's often good timing, since the gutters come off anyway while new drip edge goes on. If yours are still sound, we can put them back up. The Roof Replacement page explains that job in more detail.

Two-story brick house with a gray shingle roof, a ladder against the garage gable, shingle bundles on a pallet in the driveway and tools on a tarp in the yard

Find Out What Your Gutters Need

We'll look at your gutters and the roof edge above them, take photos and give you a straight answer. The roof inspection is free.